Best 4 Recovery Methods for a Bricked Android Phone

Best 4 Recovery Methods for a Bricked Android Phone

You have so bricked your phone. Your phone won’t turn on because you flashed a ROM, set up a mod, modified a system file, or did something else.

Stay calm. It can almost probably be fixed. Here’s how to fix a bricked Android device.

What Does a “Bricked Phone” or “Bricking” Mean?

When you “brick” your phone, it effectively indicates that your once-useful device has been reduced to the level of a brick. Typically, a “bricked phone” is unresponsive, won’t turn on, and performs improperly.

How Did You Brick Your Phone?

A phone can be bricked in a variety of ways, each of which will require a different set of actions to undo. Bricked phones can be divided into two groups:

  • The soft brick. The Android boot screen freezes, the phone becomes stuck in a boot loop, or it just enters recovery mode. If you push the power button and something happens, the device is soft-bricked. The good news is that fixing them shouldn’t be too difficult.
  • The hard brick. Nothing occurs after you press the power button. Hard bricks can be brought on by problems such as attempting to flash an incompatible ROM or kernel, and there is typically no software fix for them. Although they are extremely uncommon, hard bricks are bad news.

You’re probably soft-bricked, and you’ll see something similar to the picture above. Although it’s challenging to develop a one-size-fits-all method to unbrick Android due to the variations in how various devices operate, there are four typical techniques you can try to get things back on track:

  • Wipe the data, then re-flash a custom ROM
  • Disable Xposed mods through recovery
  • Restore a Nandroid backup
  • Flash a factory image

Make sure your phone and computer are ready to go and equipped with the necessary tools before you begin.

Read More On: Samsung Galaxy Z Flip 4: What To Know About The Phone

Most of the equipment you need to repair your phone probably already exists in your possession. Since you already know how to use them because you used them to root your device and flash ROMs, they shouldn’t be a problem. However, make sure before you start.

Custom recovery is most crucial. This was probably installed when you rooted your phone, however, it could occasionally be completely erased or rewritten by the default recovery. We advise using TWRP if you do need to reinstall it. It is a completely functional custom recovery with builds for the majority of common devices but is also far too simple to use.

Then, you might require ADB and Fastboot. You can obtain both of them from the website for Android Developers, and they are frequently used for rooting and flashing system mods. If you are unfamiliar with Fastboot and ADB, see our introduction to them.

Finally, some producers flash factory images using specialized software. Ideally, you won’t need to do this, but if you do, you can use the LG Flash Tool for LG devices, Odin for Samsung, the ZTE Unbrick Tool for ZTE devices, or the LG Flash Tool for LG devices. Just make sure that they are compatible with the model of your gadget.

With the majority of these tools, you can use a PC to repair a bricked Android device. The task can frequently be completed on the phone itself, though.

1. Wipe Data and Re-Flash a Custom ROM

If you flashed a ROM and now Android won’t boot, try this method.

When you have issues when flashing a fresh custom ROM, it’s one of the most likely scenarios that your phone will soft brick. The fact that you didn’t first wipe your data is frequently to blame in this situation.

When you decide to flash a new ROM over top of your old one instead of having to restore your applications and data, this is known as a “dirty flash” and happens. Generally speaking, you can get away with it if you’re flashing a newer version of your current ROM, but you must always delete your data anytime you flash a different ROM.

Fortunately, it’s simple to remedy as long as you properly backed up your phone. If you haven’t, you’ve unfortunately had to learn a valuable lesson the hard way. Observe these steps:

  • Boot into your custom recovery.
  • Navigate to the Wipe option and choose Advanced Wipe.
  • Check the box marked Data (you can wipe the system, ART cache, and cache again, too), then hit Confirm.
  • Re-flash your custom ROM.

You can efficiently execute a factory reset by wiping your data, but you shouldn’t let your internal storage or SD card go empty after doing so (although, again, you should back it up just to be safe). The Android setup screen will appear after you restart your phone. Your apps ought to start getting reinstalled immediately after inputting the details for your Google account.

You can recover your data from your Nandroid backup if necessary. Look below at the part on restoring a Nandroid backup.

Read More On: iphone 14 Pro Features: 7 Introduced Features Already On Android Phones

2. Disable Xposed Modules in Recovery

If you get boot loops after installing a new Xposed module, try this method.

Even while the Xposed Framework isn’t as popular as it once was, it is still one of the easiest and riskiest ways to modify your phone.

The greatest Xposed modules are so simple to install—many of them are available on the Play Store—that they give you a false sense of security. Despite the fact that installing a new Xposed module has the potential to damage your phone, it’s unlikely that anyone will first perform a Nandroid backup.

Use ADB Push to Install the Xposed Uninstaller

If it’s offered for your version of Android, the Xposed Uninstaller is the finest tool for solving these issues. Xposed may be uninstalled from your device using this little flashable ZIP file, which you can install using the recovery.

It can be stored on an SD card, or you might be able to transfer it via the ADB push technique if it isn’t already on your phone:

  • Download the Xposed Uninstaller to your desktop.
  • Connect your phone to your computer via USB and boot into recovery.
  • Launch the command prompt (Windows) or Terminal (Mac) and use the cd command to change the directory to where you have ADB installed.
  • Type adb push [full path to xposed uninstaller.zip] [full path to destination]. On Mac and Linux, precede the command with ./ (such as ./adb).
  • When the file finishes copying, flash it through the recovery.

How to Disable Xposed Modules in Recovery

Try either of these options if you can’t use ADB push or the Xposed Uninstaller.

With this technique, you can disable Xposed via recovery:

  • Boot into recovery, then navigate to Advanced > Terminal command.
  • Create a file called /data/data/de.robv.android.xposed.installer/conf/disabled
  • Reboot your phone.

By using this technique, the Xposed modules won’t launch:

  • Boot into recovery and select File Manager.
  • Navigate to the folder /data/data/de.robv.android.xposed.installer/conf/ then delete the file modules.list
  • Reboot your phone.

Any alterations to your system that the modules have made will not be undone by any of these fixes. You must restore your Nandroid backup if these modifications led to the bricking of your phone.

Read More On: The 8 Best 4chan Apps for iPhone and Android

3. Restore a Nandroid Backup

Try this approach if the approaches above didn’t work, if you need to replace a modified system file, or if you need to delete other system modifications.

For Android mods and customizations, the Nandroid backup serves as a safety net. Not just your data and applications are included; the entire operating system of your phone is also captured. You should be able to restore your soft-brick device as long as you have access to your custom recovery and a Nandroid backup. So as to:

  • Boot into recovery and navigate to Restore.
  • Select your backup from the list, confirm, and wait while it’s restored.
  • Reboot your phone.

Making backups for Nandroid devices can be difficult. They take time, thus they can’t be finished in the background. They are the quickest and easiest solution to fix a bricked phone, thus they are worth it.

Recover Data From a Nandroid Backup

If you have to wipe your data and didn’t back it up in a way that makes it easy to recover, a Nandroid backup can still rescue the day. You can restore your apps and data without having to restore the operating system on a Nandroid because it is feasible to extract particular components of the device.

4. Flash a Factory Image

If none of the previous approaches work, try this one.

Re-flashing a factory image is your only remaining choice if your attempts to unbrick Android have so far failed. This erases everything on your internal storage and returns the phone to its factory settings. Your phone will be unrooted as well.

You might be better off trying to flash a stock ROM first because it removes everything. Instead of factory images, OnePlus supplies flashable ROMs for recovery. You can find identical files for almost every device at xda-developers.com. For added convenience, you may often flash a stock ROM that has already been root accessed.

Flashing a factory image varies from flashing a ROM in that it occurs via a desktop computer connection as opposed to recovery. Other devices make use of customized software while some use the Fastboot utility from the Android SDK. For instance, Samsung makes use of the Odin tool.

The instructions for flashing a factory image vary for each device due to the various techniques employed. Additionally, not all manufacturers make their firmware accessible to the general public, therefore you must find it from unauthorized sources.

Here’s where to find factory images for some popular Android brands:

Best 4 Recovery Methods for a Bricked Android Phone

What About Hard Bricks?

Hard-bricked phones are notoriously harder to fix, but fortunately, they are far less common.

How to Unbrick a Hard-Bricked Android Phone

Make sure the phone is truly bricked by plugging it in and letting it charge for some time. Try to reset it by depressing the power button for 10 to 15 seconds (or removing the battery if your gadget is older). You might also want to try putting it into your computer; if it is not recognized by your computer, you can be very certain that your phone has been severely bricked.

If it is unquestionably hard-bricked, your options may be limited. A USB Jig, a little gadget that fits into the USB port and puts the phone into Download Mode to reload the default software, can resurrect a few phones.

On eBay, you can get cheap USB Jigs for hard-bricked phones, but only for a very limited selection of outdated gadgets. Even then, there is no assurance that they will be successful.

Beyond that, you might need to either find a local phone repairman or send your phone in for repair (though rooting it might have voided your warranty). However, you’ll probably wind up having to buy a new gadget.

Read More On: 10 Best Ways To Tell If Your Phone Is Being Tapped

Tweak Android Safely

I hope this guide has assisted you in fixing your Android device. And perhaps you won’t stop rooting and hacking Android completely after your experience.

But you may still have a lot of fun with your phone if you’d want to be cautious going forward. For some fantastic ideas, look at our guide to the finest Android customizations you can perform without rooting.

Affiliate Disclosure: Purchases that are made using our links may earn us commissions from affiliate partners such as Amazon and other retailers.

Leave a Comment!