9 Ways To Fix AirPods When They Don’t Sound Loud

Airpods fixing

One of the most well-liked Apple products is the AirPods. They function well and are simple to use. However, occasionally there are problems with them that must be resolved. One frequent problem is that with time, AirPods become quieter or have a lower volume.

How come my AirPods are so quiet?

First of all, you should be aware that there isn’t a single factor that could be reducing the volume or making the AirPods sound quiet. There could be a number of causes, but without first trying out many possibilities on your own, it is impossible to determine the precise cause.

1. Your iPhone’s low-power mode

Even if the app you’re using to listen to music doesn’t have a volume control feature, going into low power mode on an iOS device occasionally limits the audio output from some apps that are using too much battery, which may alter how loud things play.

Given that AirPods have their own battery, this is contradictory, but iOS operates in this manner.

Therefore, check to see if you have low power mode activated and turn it off to see whether the issue is fixed if your Airpods suddenly stop working with an iOS device.

2. Make sure the volume is the same on both AirPods.

They might appear quiet if one AirPod has a volume setting that is noticeably lower than the other. It could be difficult to get both AirPods to sync at the same volume.

There is a simple technique to determine if the volume on each of your AirPods is equal. Take one of them out and re-insert it. Don’t move on to the following step unless they are both connected! This will fix your issue if one is playing audio considerably louder than the other!

To rebalance the volume levels of both AirPods, try reducing the volume on both of them, disconnecting them simultaneously, and then reconnecting them simultaneously once more.

3. iPhone volume limit

This issue might also arise because some iPhones are configured with a maximum volume level. Your hearing is protected by this setting. However, you can alter this by going to Settings – General – Accessibility and then completely scrolling down until you find Volume Limit at the bottom.

It shouldn’t be a problem if you’re using your AirPods with an Android handset, but most devices include an audio limiter to prevent hearing loss.

4. Your AirPods are dirty or covered in ear wax.

The majority of AirPods have a small gap on the back that lets dust and grime in. Your ear wax might occasionally cause problems as well. Therefore, if you’re experiencing problems with your AirPods being quiet or simply not sounding properly, consider taking them out and carefully peering through the tiny holes on the back of each pod. Before attempting any additional techniques, try blowing air into the area with a blow dryer to clean it out.

Additionally, maintain your AirPods free of earwax by cleaning them out with a tissue or a paper towel. You don’t want earwax to go inside your AirPods because that will lower the bass and muddle the sound quality.

5. AirPods’ battery life is low.

They won’t play any audio at all if your AirPods are entirely dead. Therefore, before attempting to utilize any of the pods, make sure they both have some battery life left! Additionally, confirm that your AirPods case is charged properly and still has some power remaining to recharge your AirPods.

It can be difficult to know when the battery in your AirPods is close to running out because, depending on how you use them, they typically last at least a few hours. One AirPod’s battery frequently runs out before the other as well.

6. Update your AirPods, iPhone, and Mac.

Your iOS iPhone and/or AirPods may be behaving up because of software problems if you didn’t upgrade them when fresh updates were released. Go ahead and update them both to a newer version of iOS if you can!

To see whether either of these devices has any updates available:

Settings > General > Software Update on an iPhone

Check the firmware version of your AirPods in “Settings” on your iPhone or iPad (it should show something like BTXX.00X).

7. Synchronization problems with Bluetooth

Make sure your AirPods were properly paired to both of your devices (iPhone/Mac or PC) and that all of the Bluetooth settings are set correctly if you’re having Bluetooth connectivity issues.

To fix the problem, you may occasionally need to unplug and reconnect your AirPods in each device’s Bluetooth settings. A Reddit user discovered an easy solution to this issue:

  • Turn the volume down to 0 when AirPods are plugged in and playing music.
  • Keep your AirPods in your ears while disconnecting them from the Bluetooth settings page without unpairing or forgetting them.
  • Play music through the iPhone speakers while reducing the volume to 0.
  • Reconnect your AirPods and increase the volume while keeping both the AirPods and iPhone speakers at the lowest setting.

8. Using Siri to modify the volume

Anytime the volume of your AirPods needs to be changed, just ask Siri to do it! It might be helpful to slightly increase the volume from time to time, and it’s undoubtedly much more convenient than fumbling with your iPhone’s volume controls.

You may control both AirPods simultaneously by telling Siri to boost or decrease the volume by 50%.

9. Water, heat, dust, etc. can all harm your AirPods.

A liquid or other substance may have harmed your AirPods. This might make them break down and play audio improperly! You should return them to Apple for repair or replacement if this is the case during your warranty period.

If they haven’t been obliterated from the outside, whatever is still inside of it can probably be saved. Though occasionally these repairs might be very pricey, make sure you acquire an estimate before shipping anything.


Common Apple AirPods Issues and Solutions

1. Finding Lost AirPods

Although you can find your AirPods using Apple’s Find My feature, there are a few restrictions. Find the device you’re connected to for a location fix if they’re still powered on. You will see the last known position of your AirPods if they are in their case or are out of power.

pho 22

How to find your AirPods:

  • Open your web browser and navigate to iCloud.com.
  • Click Find Airpods after logging in.
  • Click the All Devices dropdown list in the menu bar at the top of the screen.
  • To find the location of your AirPods, select them.

If you know where your AirPods are in your home but can’t seem to locate them, select the Play Sound option and keep an ear out for beeping. If they are both in the case and not powered on, this won’t work.

2. Fixing Static and Patchy Audio Issues

You might be too far away from your source if you’re experiencing audio issues with your AirPods. The amazing 100-foot range of Apple’s AirPods can be significantly reduced by obstructions like walls or other sources of interference.

This won’t be a problem if you can place your source device such as an iPhone or iPod in your pocket. For the best audio quality from static sources like a computer, you must remain in close proximity.

The range of your AirPods may also be shortened by interference sources. Wi-Fi is specifically known to cause interference with the W1 chip in your AirPods. By turning off Wi-Fi on your iPhone or going to a different location to take a call, you can lessen the impact of this issue. The H1 chip is found in second-generation AirPods, and it performs better.

3. AirPods Are Randomly Pausing and Playing Music

Your AirPods are equipped with proximity sensors that may identify when you insert or remove them from your ears. If you do so, the content will be automatically played or paused unless you specify otherwise. It’s conceivable that there is a problem with the sensors if your AirPods keep halting while they are still in your ears.

Under Settings > Bluetooth on your iPhone, you may turn off this capability. Toggle off Automatic Ear Detection by tapping the I next to your AirPods. Since your AirPods will consume the same amount of power whether you’re wearing them or not, this will shorten their battery life, but at least it will stop them from repeatedly halting.

4. Failure of Automatic Ear Detection

When you take off your AirPods, Automatic Ear Detection pauses your music or other media. Check to see if the feature is turned on first if this doesn’t happen for you. Make sure Automatic Ear Detection is turned on by going to Settings > Bluetooth, tapping the I next to your AirPods, and then tapping the I again.

Make sure your AirPods are clean next. If earwax or other debris is covering the proximity sensor, it will not function. As a result, your earbuds will act as though they are always in your ears. Remember to wipe the casing; it’s simple to do with some isopropyl alcohol and a cotton swab.

5. Unable to Charge AirPods

It has been reported by certain customers that their AirPods won’t charge properly. You can test your charging cable by attempting to charge your iPhone with it, as advised by Apple. In the event that this succeeds, check the Lightning port on your AirPods charging case.

Due to the fact that many of us carry our AirPods in pockets and backpacks, materials such as fluff might get stuck in the charging port. A thin instrument, such as a pin or a paperclip that has been straightened, can be used to clean these out. To access the SIM tray on an iPhone, I prefer using the same Apple SIM key. Simply scrape the interior clean, taking care not to damage any of the fragile metal contacts inside the port. Remove anything that shouldn’t be there.



Currently, a lot of users on the internet are complaining about how silent AirPods are, but there appear to be a variety of possible causes. The most typical ones are covered above, but if you’re still having issues, be sure to check out some of the links this site offers or perform a Google search.

Affiliate Disclosure: Purchases that are made using our links may earn us commissions from affiliate partners such as Amazon and other retailers.

Leave a Comment!